JAI A-Serie HyperTerminal Configuration

How does the HyperTerminal of WindowsNT/2000 have to be configured to access a JAI A-Series camera via the serial interface?

Software Trigger under Sapera

How do I send software trigger under Sapera?

Trigger Inputs on the ViperCamlink

I want to trigger my ViperCamlink. Which trigger input should I use?

FAQ: Common Vision Blox

1:1 Display with CVB

How can I make sure that may images are displayed in their original size (1:1) in the CVB Display?

About Common Vision Blox

What is Common Vision Blox (CVB)?

Absence of Features in the AVT Marlin series

One or more of the features described in the manual do not exist in the camera!

Application Crash in the CVB Digital I/O Control Tutorials

The CVB DigIO tutorial causes a crash of the tutorial application when starting the Listener with the input of a low signal and then in the first messagebox pressing the Button NO (from the event).

Borland C++ Builder and the CVB Movie Control

I get compilation errors when inserting the CVB Movie Control (cvAVIRecOCX ActiveX Control) in Borland C++ Builder and building the application. Why?

CCIR/PAL- and EIA/NTSC-Videostandard with Imagenation PX-610 Boards

Is it possible to use a CCIR- and an EIA-camera with one PX610 board simultaneously?

Common Vision Blox Licensing and Protection Scheme

How is Common Vision Blox copy protected?

configpxd.exe (PXD-1000) Does Not Show Live Video

When running configpxd.exe (part of ImageNation PXD-1000 Board Level Library) no live image is shown. However no or status messages show up - what is wrong here?

ConfigPXD.exe Reports Missing ImageNation PXD-1000

When starting configpxd.exe from the ImageNation PXD Win32 driver collection I get the message "PXD-1000 not in the PCI slot".
The application did run previously without any problems. Is the frame grabber card or the PCI slot broken?

Custom error handling with the CVCError event.

How can I use customized error handling?

CVB BayerToRGB and Higher Bit-Depths

What bit-depths can be converted by the CVB BayerToRGB Tool?

CVB Display Coordinates on MouseClick.

How can I obtain the coordinates of a mouse click in a CVB display?

CVB Minos Magic Number not Accepted by Registration Dialog

When I enter my 6 digit Magic Number for CVB Minos as provided by STEMMER IMAGING or my local distributor, the registration dialogue tells me, that it is not correct. What's wrong here?

Destroying Listener Objects in the CVB Digital I/O Control

My program hangs when I call the CVB Digital I/O control's methods XXXListenerStop and XXXListenerDestroy (where XXX is either Bit or DWORD consecutively. Why?

Determining the CVB Root-Directory

How can I obtain the CVB root directory and then append a sub-path to it?

Different Function Names in CVB Arithmetic

In CVB Arithmetic there are several functions with similar names. Some do not work on my images others do. Why?

Driver installation For Silicon Software MicroEnable3

When installing Silicon Software SDK 3.1d on a new PC System, the driver for the framegrabber cannot be installed because the .inf is missing.

Emulating a Standard COM Port on the PCCamLink Under IFC 5.2

How can I emulate a standard COM port on the PCCamLink under IFC 5.2 to use the Windows Hyper Terminal or other standard software with the built-in serial interface of the PCCamLink?

Erratic Horizontal Lines in the Common Vision Blox Display OCX

The picture in the Common Vision Blox Display OCX is sometimes interrupted by a horizontal line. This is not depending on certain images nor does the effect occur permanently in the same image but only sporadically. Why?

Hints for Porting Applications from CVC to CVB

How much of an effort will it take to port a CVC application to Common Vision Blox?

How to Set the Image Origin in CVB

When I use the function CreateSubImage to cut out a part of an image and display the result it in a separate Display, the coordinate system that is used is obviously still from the original image. How can I set the image origin (0,0) into the upper left corner?

How to Use the Blob Function BlobGetConvexPoints in Visual Basic

I want to know if and how I could use the Blob-function BlobGetConvexPoints in Visual Basic.

Imagenation PX200 and S-VHS Cameras

I have a PXC200 from Imagenation and a SVHS Camera. I use the VB VC Display Example but I dont see a live image. Why?

Installation of Sapera or IFC under Windows NT

Are there any problems concerning the installation of Sapera or IFC under Windows NT?

Invisible JAI Camera Control Tool

I started the Camera Control Tool, I can see it in the taskbar, but I can't see the application on my desktop. Where is the application?

Issues Concerning Older IC-PCI Boards in Up-to-date Computers

In my new computer, my old IC-PCI will not run at all. In my older computer it worked fine. What is wrong?

Live Video Error Message While Starting ConfigPXD.exe

After installing the ImageNation PXD Win32 driver V1.07B for the digital frame grabber PXD-1000, the configpxd.exe application starts up with the message box: "This application will run without the ability to grab live video. Probable cause: PXD frame grabber not installed". What is missing here?

Locating Several Objects With CVB ShapeFinder

How can I locate several objects simultaneously with CVB ShapeFinder?

MicroEnableIII and CVB Image Control

After setting the FileName property of the Image OCX to the CVME3.vin driver (or after selecting this driver as startup image file in the Image Control's property page), my program is unable to open the MicroEnableIII (meIII) driver. Why?

Minimum Framegrabber Timeout in Common Vision Blox

What is the minimum timeout for a Framegrabber I can set in Common Vision Blox?

Minos Classifier Creation in Visual Basic

In Visual Basic most of the functions for creating and handling a training set (MTS) are available. However, the function LearnCLFFromMTS is not supported under Visual Basic. So, is there no way to create a Classifier at runtime in Visual Basic?

Mixing components from CVC and CVB

Is it possible to use CVB tools in CVC based applications or vice versa?

More than 8 bit images with CVB

Can I handle image with more than 8 bit with CVB?

Multimedia Devices (USB Cams, Firewire IEEE1394, TV-Tuners) and CVB

Can I use CVB with my USB camera/IEEE1394 Firewire Camera/TV-Tuner card?

Overlay Plug-In Objects in Visual Basic

I receive a "Run-time Error '13' with Type mismatch" in Visual Basic when I call the AddOverlayObject Method". Why?

PC gets stuck with PX-610A while booting up

After installing the PX-610A drivers from CVB or Imagenation my PC gets stuck or shows a blue screen while booting up. What's the reason ?

Porting Applications from CVC to CVB

Is it necessary, to port Common Vision Concept based applications to the new Common Vision Blox architecture? What reasons are there for porting an application to CVB?

Problems After the Installation of a BanditII (AGP-version)

I installed a BanditII (AGP-version) into my computer and now my PC does not react anymore. What can I do?

Problems installing the ViperRGB Device Driver 4.00 under Winindows XP

I have problems installing the ViperRGB Device Driver 4.00 under Windows XP. What can I do?

Problems with the VPAT and newer CVB Drivers

When I call the GetImageVPA function once at the beginning of my program and then use the acquired VPAT during the rest of the program, my software crashes with an access violation. Why?

PX610 Driver Shows Only Half an Image in CVB

When loading the PX-510 PX-610 driver (cvcpxa_95.vin, cvcpxa_NT.vin or cvcpxa_2k.vin) in any CVB tutorial program, only the upper half of the image is displayed, the lower half remains black. Why? Why is only a part of the image visible when I execute a CVB Tutorial program with the PX610 grabber ?

PXC200A* and Hardware Detection

I installed my PXC200A* but after every reboot, Windows detects two new hardware devices. What is wrong?

Saving Images in the IFC/ITEX Camera Configurator

Using the camera configurator I simply want to save an image to disk. But although I get no error message, no image is written. Why?

Scaling the Live Images on a TV Monitor on BanditII

I am using a TV monitor as secondary display of my BanditII. The resolution of my camera is higher than the resolution of the TV monitor. Is it possible to scale the live images down to the resolution of the monitor?

Scaling the pixeldepth from 10 to 8 Bit on a PCCamlink

I am using a 10 Bit camera with a PCCamlink. I want to scale the pixeldepth down to 8 Bit. How can I do that?

Selecting Monochrome or Colour for the PXC200 Driver

I have a PXC200 from Imagenation and a monchrome camera. In the CVB Tutorial programs I get a monochrome 24 Bit image. How could I get an 8 Bit image?

Using IFC with ANSI C Compilers

Is it possible to code IFC applications using an ANSI C compiler instead of the Visual C++ compiler?

Using the SYNC Signal Driver of the Imagenation PX610

The Imagenation PX610 has the ability to output HD and VD pulses for synchronization of cameras. How do I use this feature

Filters